ઓજારો અને મશીનરી
15 pound steel tamper for sale. Measures 45 long and the tamper base is 6 square. Call Mike Penn Hills 412-526-8360. If you reply by email and do not see my response, please check your spam folder.
ઓજારો અને મશીનરી
Milwaukee 2 wheel dolly for sale. 250 lb. capacity rating. Call Mike Penn Hills 412-526-8360. If you reply by email and dont see my response, please check your spam folder.
ઓજારો અને મશીનરી
This is a Box of 8 Valve Guides for 1928-1934 Ford Model A & B 4 Cylinder Engines. In original box from Metalurgica In Brazil. New, never used but some light surface rust. $25. They are in Penryn. Call 916-663-2246 to see them/buy them.
ઓજારો અને મશીનરી
i have 13 drillbits that drill and tap in 1 step 3 sizes all hex bits that work in impact or drill drivers 3/8-16 i have 51/4 -20 i have 61/2 -132 left 10 bucks each or 100 for all thank you sean 702-235-6228
ઓજારો અને મશીનરી
Vintage Disston hand saws, good condition. $10 each, NO Email or text, call (562) 867=3510
ઓજારો અને મશીનરી
Hobart MVP 210 wire welder , 110 or 220 like new condition , welds great cash only , 417-554-1915 $1150.00
ઓજારો અને મશીનરી
Nice metal utility 2-step folding ladder for sale. Call Mike Penn Hills 412-526-8360. If you replied by email and do not see my response, please check your spam folder.
ઓજારો અને મશીનરી
Stainless steel espresso machine with a black plastic base and accents. This Chefman model has a removable clear water reservoir, a portafilter, and a built-in steam wand for frothing milk. The top surface is a metal cup warming tray. Call 907 354244too
ઓજારો અને મશીનરી
Call 214-327-1118. no text or email.
ઓજારો અને મશીનરી
Gorilla ladder slim flop 300 lbs work platform 1131 walden ave cheektowaga ny 14211 call
ઓજારો અને મશીનરી
Must pickup…Center Point 78010, between Comfort and Kerrville Heavy Duty Cases in great condition Cash or Venmo Measures 21 x 13 x 9 $50.00, price is negotiable If interested please text 832-441-4442
ઓજારો અને મશીનરી
Earthway grass seed spreader, with shoulder harness, in good condition, $95 buys it, call 845-206-1030
ઓજારો અને મશીનરી
RYOBI 1 + P 519 Vn 1.5 Ah Lithium-Ion 18 V battery Battery Charger Item is new from multi pack box. Please email me for any question. 650-438-5897
ઓજારો અને મશીનરી
25 shelves , all adjustale , 10 between the uprights Thanks, Jay 253-320-4766
ઓજારો અને મશીનરી
Black and Decker Power Drill Model FS2402D + Battery FS240BX + Battery Charger BDFC240 Type 1 + Carry Case In good condition. The Black & Decker FS2402D is a model number for a 24-Volt Firestorm Cordless Hammer Drill, a power tool used for drilling and driving screws, requiring a compatible 24V battery pack (like the NiMH FS24BX) and charger, known for DIY tasks, part of Black+Deckers affordable tool lineup. Key Characteristics: Type: Cordless Hammer Drill FS2402D Voltage: 24V (Volts). Battery: Uses older NiMH (Nickel Metal Hydride) battery packs, such as the 2000mAh FS24BX. Chuck: Typically features a 1/2-inch keyless chuck. Series: Part of the Firestorm series, a line known for its affordability.
ઓજારો અને મશીનરી
Pics: text or call 817-688-0241/ NO EMAILS ANSWERED/ early brake repair seat etc / rolls / Tags: Rolling seats, Chairs automotive repair
ઓજારો અને મશીનરી
I have a Ryobi (model R163) Fixed Base Double Insulated Router and Ryobi (model RT102) Router Table combo kit along with a Ryobi (model A25RS12) 12 piece router bit set for sale. All of the items are in excellent condition and were used only one time many years ago for a small project. I have used only one bit from the 12 piece kit, the rest have never been touched. Everything has been safely kept in a climate controlled storage unit since 2010. Comes with all original included accesories and instruction/user manuals. I purchased the router and table as a combo kit back in 2009 when it was first introduced. Ryobi eventually phased out the combo kit in 2014 in favor of updated versions. I also purchased the 12 piece bit set at the same time. NOTE: The router can be seperated from the table and used alone. Router Description: The Ryobi R163 is a corded 8.5 Amp 1-1/2 peak horsepower fixed-base router. It features a die-cast aluminum base, built-in LED work lights for visibility, a micro-adjustment knob, and a quick-release lever for fast depth changes. It runs at 25,000 RPM and uses a 1/4 inch collet. Specifications: • Power: 120VAC 60Hz 8.5 Amp motor, 1-1/2 peak HP. • Speed: 25,000 RPM (single speed). • Collet Capacity: 1/4 inch. • Base Material: Die-cast aluminum. • Power Cord: 6 foot long terminated in a two-prong plug. Key Features: • LED Lighting: Illuminates the work area for enhanced line-of-sight precision. • Quick-Release Lever: Allows fast gross depth adjustments alongside a fine micro-adjustment knob. • Ergonomic Handles: Designed for user comfort and steady handheld control. Router Table Description: The Ryobi RT102 is a compact, benchtop router table designed primarily for DIY hobbyists and light woodworking projects. It was sold in a kit bundled with the corded R163 router. It acts as a lightweight, stationary workstation for precise edge routing, cutting molding, or shaping pieces. Specifications: • Designed specifically for use with the R163 router. • Table Dimensions: 13 inches deep by 18 inches wide by 12 inches tall. • Fence Length: 18 inches. • Maximum Cutter/Bit Diameter: 1-15/16 inches. • Electrical Capacity: Integrated 120VAC 60Hz 15 Amp safety switch box. • Power Cord: 6 foot long terminated in a two-prong plug. • Table Material: Durable, rigid plastic injection-molded housing with lightweight legs. Legs have holes on the bottom for mounting to a solid surface. Key Features: • Integrated Power Switch: The front of the table features a 15A dual-outlet safety switch box with a removable safety key. This allows you to plug your router directly into the table housing and control it via the master front switch. • Adjustable Fence Assembly: A generic plastic straight fence with an attached sliding plastic cutter guard to act as a barrier between your fingers and the spinning bit. • Miter Gauge Slot & Scale: Built with an integrated miter track running the width of the table top, allowing the use of an included basic plastic miter gauge for controlled angle feeding. • Throat Plates/Insert Rings: Includes interchangeable insert plates (throat plates) to support the wood piece securely based on the diameter size of the router bit you are using. • Vacuum Attachment Port: The back of the fence assembly includes a built-in dust collection port meant to connect directly to standard shop vacuums. Router Bit Set Description: Officially marketed as the Ryobi 12 piece Carbide Wood Crafter Kit, the A25RS12 is easily recognized by its signature hand-crafted wooden storage cabinet featuring a swing-out front door, a clear acrylic viewing window, and pull-out removable bit trays. Comes with allen key and extra roller bearing parts. Includes the following twelve 1/4-inch shank bits: • Straight Bits: 1/4, 3/8, 1/2, and 3/4 • Roundover Bits (with Bearing): 1/4 and 3/8 • Roman Ogee Bit (with Bearing): 5/32 • Flush Laminate Trimmer: 1/2 • V-Groove Bit: 90° (1/2) • Chamfer Bit: 45° (1-1/4) • Core Box Bit: 1/2 • Dovetail Bit: 1/2 I originally paid $145 for the router and table combo kit and $40 for the 12 piece bit set (less taxes). Asking $100 firm CASH ONLY for all. NO SHIPPING, NO MEETUP. DOOR PICKUP ONLY PLEASE.
ઓજારો અને મશીનરી
Please NOTE: This is the top to the Sears Ulti Mate cabinet set (in photos). This top retails for $129 on sale. GA-11UG Ulti MATE Work Surface, Worktop, TOP, Workbench TOP. If you do not have the Ulti Mate cabinets, this top measures 2 x 4 and you could build your own workbench base out of wood and install this beautiful new top onto it. It has no-slip pad underneath, you could put it anywhere... Call or Text 903 - nine twenty - four four 75 Click More Ads By This User to see all my stuff.
ઓજારો અને મશીનરી
Very heavy old-school industrial pallet puller/skidding hook with heavy chain. Forged steel construction and built extremely tough. Used for pulling loaded pallets, machinery, logs, or other heavy items with a forklift, winch, tractor, or tow setup. Condition: • Solid heavy steel • No obvious cracks or breaks • Surface rust from storage only • Chain included Great for: • Farm use • Industrial/shop work • Recovery/rigging • Off-road or equipment pulling • Collectors of old industrial tools This thing is HEAVY. Located in Anchorage. Please call or text Mellow - 907-441-8844
ઓજારો અને મશીનરી
Made by/for Tru Value - Master Tradesman Model: WL500SPT-TV. This is a Halogen 500 Watt portable work light with adjustable height folding tripod. It features 2 settings; Low 250W and Hi 500W selectable with a two way switch in back of unit. The light has a quick release knob to easily detach for use on ground tables, workbench and more. Unit has a 6 (18-3) grounded power cord. Die Cast Aluminum Light Housing With Tempered Glass Lens & Heavy Gauge Protective Grill, 2 Adjustable Tilt Knobs On Head, Switch Has Protective Cover, Soft Foam Hand Grip, Tripod bases folds for easy storage, and has a Twist Lock to adjust from 24 To 43. Two spare 500w halogen bulbs included (cost was 7.50 each). Cash Sale No Holds Call or Text for pick up Other Product Facts / Cautions Watts: 300 or 500 selectable and uses only Type T bulbs 500 Watt maximum. Caution - risk of exposure to ultraviolet (UV) radiation. Do not operate without complete bulb enclosure in place or if lens is damaged. Due to power range the unit will get hot! Which is why it has a protective grill.
ઓજારો અને મશીનરી
50 SOLID 800 Lb. CAST IRON FLY WHEEL/ c.1900 No cracks or repairs. Heavy Duty Wheel. $800. OBO Call or Text Mark 520-990-9271 NO RETURN Emails.
ઓજારો અને મશીનરી
2 floor stand bottle corkers. One Italian, one Portuguese. Price is for each, choice. Cash on pickup only. Text/email any time. Calls 9a-9p only.
ઓજારો અને મશીનરી