Used Sany SY50U 2022 4 YR-4200 HOURS WARRANTY

This machine is in excellent condition and is equipped with a Fleco manual pin-grabber coupler, hydraulic thumb, 24 dig and 48 clean out. Financing available with payments as low as $750.00 Diamond C trailer can be added to the finance package for a total cost of $64950.00 SY 50 U 11,707 lb | 45.2 hp | 113 Dig Depth The SANY SY 50 U is a high-performance 0 tail swing excavator, designed for landscaping, light forestry, agriculture, small construction, and utility work. Its swing boom and compact design provide exceptional maneuverability, allowing operators to work efficiently in confined spaces while maintaining powerful digging and lifting capabilities. The backfill blade enhances grading and backfilling, while the hydraulic coupler ensures fast and easy attachment changes, improving job site efficiency. Powered by a durable Yanmar engine with auto-idle, the SY 50 U delivers fuel efficiency and reliable performance for demanding applications. Its adjustable auxiliary flow and pressure system makes it highly adaptable for attachments such as thumbs, brush cutters, and demolition breakers, providing multi-purpose functionality across job sites. Backed by the industry’s strongest standard warranty of 5 years/5,000 hours, the SY 50 U delivers maximum value. Canby Rental & Equipment Harley Brattain 503-476-2283 24621 S. Barlow Rd. Aurora, Or 97002 You have chosen wisely FAQ’s 1. What does the warranty cover? A. Generally, the machine is covered concerning manufacturers defects. Attachments carry a 1-year warranty. Batteries have a 1-year warranty and tracks, and glass are usually NOT covered. A common rule of thumb is “you’ll know if you broke it and that won’t be covered.” Sany does cover travel up to 150 miles 1 way for a round trip of 300 miles. Equipment NW requires a travel deposit to respond to warranty claims in the field and refunds the balance of 300 miles or under upon warranty approval. 2. What is the hydraulic flow of this machine?for running attachments. A. The SY 35 has an operating flow of 23.2 Gallons per minute and an auxiliary flow of 18 gallons per minute. Auxiliary is used for running attachments. 3. What does this require to run an attachment? A. There are 2 options that we use most commonly: the first at $1,300.00 is to put a diverter or 3-way valve on the stick that diverts flow from the thumb to the attachment with the turn of a wrench, no need to uncouple the thumb and it is held in the upward positionhydro-lockedwhen the flow is diverted. You will need to turn on the flow every once in a while, to tighten it up. With the flow diverted to a second quick-connect you plug the attachment into the second connect and perform operation with the same roll switch used for thumb operation. The second option at $700.00 is to put a quick connect on the thumb and disconnect the thumb when you need to use an attachment. The thumb will need to be strapped or chained in the up position during the use of the attachment to keep it from drifting downward. There is a third option of running a complete, second hydraulic circuit out the boom and stick from the valve body on the interior of the machine. This is time-consuming and expensive and most of our customers who are not full-time machine users do not elect the expense of this operation. 4. What are the service intervals? A. There is an oil change and oil sample required at 50 hours. After the initial oil change there is a full service and samples of the oil, hydraulic fluid, and final drives at 250 hours, 500 hours and every 250 hours after 750, 1000, 1250, etc. Equipment NW also employs 2 outside service trucks and performs warranty, repairs and service in the field when requested. 5. Are parts readily available? A. Yes. We have a fully stocked parts room for the commonly affected and wear parts including many ancillary parts like teeth, chains, binders, and other attachment pieces. Sany has a main Parts Distribution Center located in Peachtree, GO that is fully stocked and performed to an over 90 fulfillment rate even through the lean Covid years. We have always had machines and parts. 6. Is the blade adjustable? A. Sany machines come standard with a 2-way blade, up and down, and Sany itself does not offer another option for this. However, Equipment NW does offer a blade float option; An accessory that allows the blade on the machine to float over gravel or dirt without the operator having to continuously control the blade handle. This is used primarily in the leveling or grading of: 1. Sidewalks 2. Driveways 3. Lots 4. Yards 5. Trails. This and other kits are available on our website, equipmentnw.com, under PARTS – Excavator Upgrade Parts Kits., and can be purchased separately or installed in our shop. Check for pricing. Keywords: mini ex, mini excavator, trackhoe, hoe, track, backhoe, back, sunward, Yanmar, Volvo, used, Takeuchi, Mini, Kubota, Komatsu, Kobelco, John Deere, IHI, Hitachi, excavator, dozer, construction, Caterpillar, Case, Bobcat, Hyundai, Doosan, excavators, mini excavator, mini x, mini ex, Cat, Sany, Tractor, Compact, Midi, 0 tail, Terex, Wacker Neuson, JCB, track loader, skid steer, trackloader, skidsteer, LonKing, Zoom Lion, Liugong, Sumitomo, Atlas Copco, Liebherr, Mitsubishi, Samsun, Toro, Mahindra, Massey Ferguson, New Holand, Lowboy, Low Boy, truck, pickup, 4 x 4, Farm Tractor, Debris clean up, clearing, property maintenance