logo

Pašreizējā atrašanās vieta

United States

user

Charles Adams

Loceklis :
Kansas City, MO 64147, USA
Zvanīt
saleitem
Charles Adams
Cummins 8.3L diesel engine

8.3 Cummins diesel engine Currently in a Koehring rock drill unit - Can start and run the engine Date of manufacture 01/20/98 Rated HP: 250 @ 2500 RPM Engine serial #: 48303345 Injector P/N: 3802098-PX If you have any questions you can call Bill at 816-225-7030 or 816-618-3679 NO TEXTS

Kansas City, MO 64147, USA
saleitem
Charles Adams
Double drum roller - Cummins diesel engine

This is a Dresser 712 smooth double drum roller. 41/2 drum diameter. It shows 1,915 hours on the hour meter. It has the 3.9 L 4 BT 87 HP Cummins diesel engine. Fully operational. Will consider trades. If you have any questions you can call Bill at 816-225-7030 or 816-618-3679. NO TEXTS NO EMAILS

Kansas City, MO 64147, USA
saleitem
Charles Adams
John Deere 110 loader / backhoe bucket

John Deere 110 loader/backhoe bucket 20 Part #: LVB 25754 2.62 CU FT New/unused If you have any questions you can call Bill at 816-225-7030 or 816-618-3679 NO TEXTS

Kansas City, MO 64147, USA
saleitem
Charles Adams
Altec derrick digger

Altec derrick digger Model: D 947-TR Date of Manufacture: September 2004 4 outriggers Pole guide 15,000 pound capacity winch 6 long x 24 diameter bit 34 frame 24,000 pound load capacity 3 sections / 47 reach Upper captain control station Theres 173 of bed frame Will consider trades. If you have any questions you can call Bill at 816-225-7030 or 816-618-3679 No texts No Emails

Kansas City, MO 64147, USA
saleitem
Charles Adams
Koehring C4470 rock drill

Koehring C 4470 crawler rock drill Teleskoop 8.3 Cummins diesel engine Hydraulic return line is broken Possible pin is sheared in drive train gear box If you have any questions you can call Bill at 816-225-7030 or 816-618-3679 NO TEXTS

Kansas City, MO 64147, USA
saleitem
Charles Adams
Knapheide hoist

Knapheide sub frame hoist Twin cylinder Model: 2527 Serial number: KH 11241 Knapheide said it has 20 ton capacity with a 20 bed with no overhang. Knapheide estimates that a 4.5 GPM pump is needed for this hoist. If you have any questions you can call Bill at 816-225-7030 or 816-618-3679. NO TEXTS

Kansas City, MO 64147, USA
saleitem
Charles Adams
Cummins 3.9L 4BT diesel engine

3.9 L 4 BT Cummins diesel engine 87 HP Currently in a double drum roller Can see it run If you have any questions you can call Bill at 816-225-7030 or 816-618-3679 NO TEXTS

Kansas City, MO 64147, USA
saleitem
Charles Adams
Seal coat tank

Seal rite 1500 gallon seal coat tank Custom built frame: 4 x 8 tube frame Skid width is 63 and skid length is 200 Fork pocketsthis unit can be picked up fully loaded 8 D rings welded around perimeter for tie downs Forward and reverse power agitator powered by a 13 HP Honda motor with electric start Emglo air compressor We added a pressurized water tank to the skid. 100 hose on electric reel This unit has always been stored inside while not in use. We built the axle setup in the picture for mobility of the unit when a forklift is not available or where side access is not an option. This axle is detachable. Will consider trades. If you have any questions you can call Bill at 816-225-7030 or 816-618-3679. NO TEXTS

Kansas City, MO 64147, USA
saleitem
Charles Adams
Double drum roller - Cummins diesel engine

This is a Dresser 712 smooth double drum roller. 41/2 drum diameter. It shows 1,915 hours on the hour meter. It has the 3.9 L 4 BT 87 HP Cummins diesel engine. Fully operational. Will consider trades. If you have any questions you can call Bill at 816-225-7030 or 816-618-3679. NO TEXTS NO EMAILS

Kansas City, MO 64147, USA
saleitem
Charles Adams
Takeuchi TB240 tailgate / rear door

Takeuchi TB 240 tailgate / rear door Good condition If you have any questions you can call Bill at 816-225-7030 or 816-618-3679 NO TEXTS

Kansas City, MO 64147, USA
AI Float Button